B&C 15CL76 (8 ohm) Loose Speaker

SKU: B&C-15CL76

R 3,499.00

Tax included

Only 1 left!

15CL76

LF Drivers 15.0 inches

 

800 W Continuous power handling

3.0 in (76 mm) Voice coil diameter

Neodymium Inside Slug Magnet material

  • 18NBX100

Features

  • 800 W continuous program power capacity
  • 76 mm (3 in) copper voice coil
  • 40 - 3000 Hz response
  • 98.5 dB sensitivity
  • Ventilated voice coil gap for reduced power compression

Specifications

Specifications

  • Nominal Diameter380 mm (15.0 in)
  • Nominal Impedance8 Ω
  • Minimum Impedance6.3 Ω
  • Nominal Power Handling1400 W
  • Continuous Power Handling2800 W
  • Sensitivity398.5 dB
  • Frequency Range40 - 3000 Hz
  • Voice Coil Diameter76 mm (3.0 in)
  • Winding MaterialCopper
  • Former MaterialGlass Fibre
  • Winding Depth19.0 mm (0.75 in)
  • Magnetic Gap Depth11.0 mm (0.43 in)
  • Flux Density1.15 T

Design

  • Surround ShapeTriple Roll
  • Cone ShapeExponential
  • Magnet MaterialNeodymium Inside Slug
  • SpiderSingle
  • Pole DesignStraight Pole
  • Woofer Cone TreatmentWP Waterproof Front Side
  • Recommended Enclosure100.0 dm3 (3.53 ft3)
  • Recommended Tuning47 Hz

Parameters4

  • Resonance Frequency42 Hz
  • Re5.1 Ω
  • Qes0.34
  • Qms7.9
  • Qts0.33
  • Vas135.0 dm3 (4.8 ft3)
  • Sd855.0 cm2 (132.5 in2)
  • η₀2.9 %
  • Xmax7.0 mm
  • Xvar8.5 mm
  • Mms108.0 g
  • Bl21.0 Txm
  • Le1.3 mH
  • EBP123 Hz

Mounting and Shipping Info

  • Overall Diameter389 mm (15.31 in)
  • Bolt Circle Diameter374 mm (14.72 in)
  • Baffle Cutout Diameter353.0 mm (13.9 in)
  • Depth171 mm (6.73 in)
  • Flange and Gasket Thickness11 mm (0.43 in)
  • Air Volume Occupied by Driver4.4 dm3 (0.15 ft3)
  • Net Weight3.2 kg (7.0 lb)
  • Shipping Units1
  • Shipping Weight4.5 kg (9.92 lb)
  • Shipping Box425x425x224 mm (16.73x16.73x8.82 in)

Service Kit

  • 2 hours test made with continuous pink noise signal within the range Fs-10Fs. Power calculated on rated minumum impedance. Loudspeaker in free air.
  • Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
  • Applied RMS Voltage is set to 2.83 V for 8 ohms Nominal Impedance.
  • Thiele-Small parameters are measured after a high level 20 Hz sine wave preconditioning test.